model VibroPro RT
Working width from 4m to 9m feature excellent transport abilities as they are hydraulically foldable, via automatic tilting inwards/outwards of the wing sections which are mounted on robust frame of exceptionally good stress capacity.
VibroPro RT models are equipped with front cage rollers Ø 380 mm made of round rods. Cage rollers enable easy and exact depth regulation via a crank handle, while they enhance the leveling result. VibroPro RT models are also very suitable for very shallow seedbed preparation. Front cage rollers are always accompanied by a front knife bar which carries crumbling knifes. The knife bar is in front of every front roller and is height adjustable. The knifes attached to it assist in crushing, grinding and milling the otherwise unworkable clay or the bigger clods.
- Robust, hydraulic folding frame 200x200x10 mm
- 4 rows of S-tines made of 50×50 mm square pipes
- Adjustable front cage rollers Ø 380 mm, supported in ball bearings, for precision cultivation
- Adjustable front knife bar with crumbling knifes
- Reinforced, double rear crumbler rollers Ø 350 mm, bearing mounted, shaft Ø 40 mm
|Model||VibroPro RT 400||VibroPro RT 450||VibroPro RT 500||VibroPro RT 600||VibroPro RT 700||VibroPro RT 800||VibroPro RT 900||VibroPro RT 1000||VibroPro RT 1100|
|Working width (m)||4,0||4,5||5,0||6,0||7,0||8,0||9,0||10,0||11,0|
|Transport width (m)||2,4||2,4||2,4||2,4||2,4||3,0||3,0||4,0||4,0|
|Number of S-tines||36||38||42||48||58||68||76||84||92|